A.Brief Introduction DMK-R6 (6 stations, one mould in each station), 10200 Bottles/Hour, 1800 bottles/station/hour.
DMK-R8 (8 stations, one mould in each station), 14400 Bottles/Hour, 1800 bottles/station/hour.
DMK-R10 (10 stations, one mould in each station), 18000 Bottles/Hour, 1800 bottles/station/hour.
DMK-R12 (12 stations, one mould in each station), 21600 Bottles/Hour, 1800 bottles/station/hour.
DMK-R16 (16 stations, one mould in each station), 28800 Bottles/Hour, 1800 bottles/station/hour.
DMK-R6, DMK-R8, DMK-R10, DMK-R12, DMK-R16 is the most stable two-step fully automatic high-speed rotary PET stretch-blow moulding machines(reheat). The capacity of the products is from 0.25L to 2.0L. It can blow pet bottles for different use: carbonated, mineral water, milk, beer, oil, hot filling tea, and other drink packing containers, which is made of plastic of crystalline type, such as PET, PP etc.
DMK-R series has adopted original heating and blowing technics, by which the automatic blowing machine series have achieved in powerful productivity but very reasonable price.
B.Machine Construction B.1. Preform feeding and loading unit
The design of the recycling unit prevents the preforms from getting bound up in the unscrambler. The star wheel design of the feeding unit provides the lowest possible changeover times for switching to different perform sizes.
B.2. Linear Oven A mandrel capable of turning 180 degrees guarantees uniform neck section during the heating. A unique oven ventilation system enables the DMK-R series blower to handle various difficult applications easily.
①.Power saving: heater is fixed with link of short section(43.8mm), which assures to heat more performs with the same heating length. In this way, it saves electricity of 25%.
②.Water cooling plate: cooling bottle neck avoid neck deformation during heating. ③.Infrared heat lamps:
a. Each lamp is individually adjustable;
b. Lamp gripper is adjustable as angle changes;
c. Lamp rod is adjustable in length, which is good for bottom heating;
B.3. Preform and bottle transfer wheel
The new DMK-R series utilizes a classic double cam telescopic gripper system, this guarantees reliable movement, and easy maintenance.
B.4. Molds and Mold Carriers
The mold carrier utilizes a shell blow mold design; this reduces the changeover time for different blow molds. The Mold carriers accommodate all shell type molds from conventional blow molding machines, this saves time and expense for bottle producer. Moreover, the reliable quick locking system maximizes the performance of the mold carriers.
B.5. Blowing Station
A changeable cam for the stretching curve guider guarantees the form quality for different size bottles. Monobloc blowing valves achieve the fastest and most consistent blowing process possible. Bottle necks are protected during the blowing stage by a specially designed sealing unit.
C.Options: C.1. PID heating zone system (Option)
Within this system, an infrared thermometer automatically detects the temperature of the performs and adjusts the temperature of the oven as needed. This automatic adjustment avoids the influence of a temperature difference between day time and night; also the system can use an additional lamp alarm, this alarm will sound when it detects any broken or aging lamps.
C.2. Patented Air Recovery system (Option) We know that most of the production costs for blowing bottles are attributed to generating the high pressure compressed air and applying heat to the preforms. In order to lower these production costs for the bottler producer, Demark Machinery has introduced its patented Air recovery system. This system recovers up to 30% of the final high pressure blowing air and ultimately lowers the cost to produce bottles.
C.3. Air cooling system (Option)
Thanks to the design contributions of our engineer, Demark Machinery has developed a revolutionary air cooling system for hot fill PET bottles. After high pressure blowing, an air cooling stage is introduced to reduce the level of PET residual stress and increase the rate of PET crystallization. After this air cooling process, now PET bottles can stand hot filling without deformation.
D.Advantages of Rotary Automatic Stretch-Blow Molding Machines
D.1. High productivity: 1700pcs/cavity/hour
D.2. High eligible rate: above 99.6%
D.3. Adopting SIMENS electric controlling system; with high precision and fast speed
i). blowing system adopts Germany valve and cylinder, which has stable and accurate stretching speed and good product consistency
ii). heating system adopts PHILIPS original infrared lamps, which is good in thermal properties and high in durability.
iii). Germany SEW main electric motor assures stable rotating speed and stable operation.
D.4.Mold fixing structure assures fast mold fixing speed and fast mold changing speed
D.5.Automatic plastic loader and automatic recovery device.
E. Research and Development Capacity: Demark is composed of a powerful team in research and development including more than seventy intermediate and senior technologists. In order to meet different clients' demand, our technologists successfully design and manufacture a series of rotary plastic blow moulding machines: DMK-R12, DMK-R14 and DMK-R16.
F. Advanced Processing Equipment:
Machine center, digital lathe, EDM, such as many imported American and Japanese machine tools assure processing precision and good interchangeable function.
G. After Sales Service: With good brand reputation and attitude of customer-centric, we invite special technologists responsible for after sales.
i). Service hotline is 24-hour on call.
ii). Fast response: Domestic call is handled within 12 hours.
International call is handled within 24 hours.
It's used for the produce of PET water bottle, hot-fill bottle, CSD, drinking oil and pesticide bottle
Feature:it’s the only one that adopts all servo control system in China, with stalbe structure and high speed, the way
of PID self-feedback nonstop heating can make use of the infrared heating efficiently, which is energy saving and easy to maintain , the equiped mold is very flexible which can meet the needs of non-stop inline produce. The touchable screen control and temperature adjustment simplified the temperature adjustment for different bottle blowing.
First invented rotary preform infeeding structure in China, which is very stable and reliable and applicable of different size of preform.
The servo conveying system with high accuracy of position,quick speed and good stability, as there is no air resource which is energe saving and with low maintenance charge.
Servo motor controls the stretch rod to stretch the preform.The advantage is: it can stretch the
preform by phase, firstly, position the preform,make the preform in a vertical position, then second stretch.By this way it guaranteed the stretch of the preform evenly and consistently .The stretch speed is very fast and accurate.
The carrier and carrier head is separate , which can changed different carrier head in a short time,the speed of the carrier rotation device is changeable which can adjust the rotation speed of the preform and make sure that the preforms are heated evenly.
The reversal structure design is easy for the adjustment of the height of the lamp and the distance
between the lamp and preform and also for lamp change. The non-stop heating mode guaranteed every
preform can be heated evenly, the gap between preforms is very small and energy saving. There is apretecting for for neck screw, which can pretect the neck screw from deformation while heating.
DMK-L series are the most stable two-step fully-automatic pet stretch-blow moulding machines(preheat). It has two to eight cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed: 4000BPH(4-cavity), 6000BPH(6-cavity), 8000BPH(8-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
a).PLC colour display: SIEMENS(GERMANY)
c).Controller of preform transfer:Servo motor National(JAPAN)
d).Other electric parts are all world-famous brand
C.1. Stable performance with advanced PLC.
C.2. Conveying preforms automatically with conveyor.
C.3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
C.4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
C.5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
C.6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
C.7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
C.8. Strong clamping force with high pressure and double crank links to lock the mold.
C.9. Two ways of operating: automatic and manual.
C.10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
C.11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
C.12. Contamination is avoided for the bottle body.
C.13. Ideal effect of the chilling with the chilling system.
C.14. Easy installation and starting
C.15. Low rejection rate: less than 0.2 percent.
Fully-Automatic Big Volume Linear PET Stretch Bottle Blowing Machines.
SBL Series As a pioneer in manufacturing the full-automatic linear PET stretch blow molding machine especially for the big volume bottles, Demark adopts special design on the preheat construction and servo driving system to enable it big volume blow molding machine series save more than 50%power compared with similar machines by others.
SBL Series is available for blowing bottles for beverage, edible oil, catchup, cleaner, cosmetic and medical products with the volume between 5L and 20L
Good stability: thanks to the excellent design concept and strict machining request as well as the outstanding electric collocation.
Competitive price: provide machine with good quality while lower price.
Demark Machinery bring in the method of rotary blowing mould machine to develop linear blowing mould machine for the first time among the domestic manufacturers, which has resolved the problems of bad stability and low efficiency of traditional linear blowing mould machine.
Jeepine Machinery is the first company that makes the single cavity capacity up to 800 bottles per hour (take 20L Oil bottle for example).
Peculiar heating system of light bar and light box with special design make it saving electric power by 50%.
Blowing system: cooperate with the international leading research organizations; create the high-pressure integration valve group, the single cavity productive capacity is increased by 60%.
Heating system: patent light box provides constant and circulatory temperature(heater is fixed with short linkage 101mm, much shorter than 240mm), to save electric power by more than 50%；accurate control on the position and speed by servo, assure the action of the preheating-chain and manipulator in synchrony。
Stretching system: use linear sliding track framework instead of liner bearing, which offers an outstanding improvement of stability.
Main transmission system: adopt patent double strand roller chains technology, to assure the demands of stability and high speed.
Hydraulic pressure close mould system: take the place of traditional pneumatic die set, with both sides pressure and four boards forming, assure the stability an the pass rate of 99.8%.
manipulator system：adopt servo controlling manipulator to keep the action of perform-sending and bottle-taking in synchrony, accurate and fast